|
This bracket is mounted on
the right side of the radio.
- Remove the cubby hole panel below the climate control at the bottom.
Start at the top right corner and pull to release a total of 4 clips.
- Pull with your fingers at the bottom of the climate control panel
until the bottom clips are released. This will also release some clips
on the instrument panel. Pull at the bottom right of this panel to allow
the fan control knob to slip out when the climate control panel is removed.
- Remove four 10 mm bolts to release the radio unit. Pull the radio
out.
- Place the DBTU07 on the right side of the radio, in the only slot
where it fits. Attach it with two sheet metal screws or equivalent.
- Replace the radio and the climate control panel, and snap the other
panels into place.
|
