FORD DASH MOUNT (F250,F350,F450,F550,
2005 and Later - Super Duty)
This bracket is mounted below the fan control
knob.
Tilt the steering wheel to the lowest position and remove the bezel
using a dash trim removal tool or similarly shaped object. Start at
either the top left or top right corner and work your way around until
all the clips have been
released.
Lift the bezel out of the way. Some wires may have to be disconnected.
Place the BR168 against the vertical strip situated below the fan
control knob so that the bracket follows the
contour of the dash. Use it as a guide to drill 2 pilot holes on the
strip (5/64").
Attach the bracket by fastening it to the dash with two #10 x 1/2"
screws.
Reattach any wires previously disconnected and replace the bezel.
